Orbi Router Setup

Orbi RBK50V Setup

Setting up the Orbi RBK50V is effortless. Begin by connecting the router and satellite, ensuring optimal placement for seamless coverage. Use the Orbi app for a user-friendly installation process, guiding you through network configuration and customization. The device boasts advanced features like Tri-Band WiFi, dedicated backhaul, and a built-in speaker for Alexa integration. Experience high-performance WiFi with minimal hassle, thanks to the Orbi RBK50V Setup, a simplicity and innovative technology.

Understanding Orbi RBK50V Setup

Orbi RBK50V Setup is a straightforward process, simplifying your home WiFi experience. Connect the router and satellite, then follow the user-friendly Orbi app instructions for seamless configuration. Enjoy advanced features like Tri-Band WiFi, dedicated backhaul, and Alexa integration through the built-in speaker. With Orbi RBK50V Setup, effortlessly create a high-performance network, ensuring optimal coverage and connectivity throughout your home.

Orbi RBK50V Setup: Step-by-Step Guide

Method 1: Orbi RBK50V Setup Via WPS 


    • Turn on your Orbi RBK50V route and satellite, ensuring they are connected to power.

    • Find the WPS button on your Orbi router and press it. Look for the WPS LED to start blinking.

    • Within two minutes, press the WPS button on your Orbi satellite. The WPS LED on the satellite should also start blinking.

    • Allow a couple of minutes for the router and satellite to establish a secure WPS connection. The blinking WPS LEDs will become steady when connected.

    • Confirm that the WPS LEDs on both the router and satellite are no longer blinking but are now solid, indicating a successful connection.

    • Make sure your Wi-Fi devices are now connected to the Orbi network. Enjoy your extended Wi-Fi coverage!

Method 2:   Orbi RBK50V Setup via Web Based 


    • Make sure your computer or mobile device is connected to the Orbi network. You can connect either through Wi-Fi or using an Ethernet cable.

    • Launch your preferred web browser (like Chrome, Firefox, or Safari).

    • In the browser’s address bar, type “orbilogin.com” and press Enter. This will take you to the Orbi web-based setup page.

    • Enter the default login credentials (usually “admin” for both username and password). If you’ve changed these before, use your updated credentials.

    • The Orbi setup wizard will guide you through the process. Follow the on-screen instructions to set up your Orbi RBK50V system, including creating a new Wi-Fi network name (SSID) and password.

    • Position the Orbi satellite in a central location within your home to optimise Wi-Fi coverage. Ensure it’s powered on and connected to a power source.

Accessing and Managing Your Orbi RBK50V

 Orbi RBK50V Setup Login Process


    • Ensure your device is connected to the Orbi network, either through Wi-Fi or using an Ethernet cable.

    • Launch your web browser (like Chrome, Firefox, Safari).

    • Type “.orbilogin.com” in the browser’s address bar and press Enter.

    • Enter the default login credentials, usually both username and password are set to “admin.” If you’ve changed them before, use your updated login details.

    • After logging in, you’ll be taken to the Orbi dashboard. Here, you can configure settings and manage your Orbi RBK50V network.

Resetting Orbi RBK50V


    • Locate the reset button on your Orbi RBK50V router; it is typically a small button and may require a paperclip or a similar tool to press.

    • Ensure that the Orbi router is powered on.

    • Press and hold the reset button for approximately 10 seconds, using a paperclip or a similar tool if necessary.

    • Press and hold the reset button for the specified amount of time, then let go. The process of reset will be started by the router.

    • Allow the Orbi RBK50V router to undergo the reboot process, which may take a few minutes.

    • Once the reboot is complete, the router will be restored to its factory settings.

Firmware Update Orbi RBK50V


    • Connect your computer or mobile device to the Orbi WiFi network.

    • Launch a web browser and type “” or “orbilogin.com” into the address box.

    • Log in using your Orbi username and password.

    • Once logged in, go to the “Advanced” tab.

    • Click on “Administration” and then select “Firmware Update” or a similar option.

    • Check for the latest firmware version available for your Orbi RBK50V.

    • If there’s a new version, download it to your computer.

    • On the Firmware Update page, click on “Choose File” or a similar option.

    • Select the firmware file you downloaded and click “Upload” or “Update.”

    • Allow the firmware update process to complete, which may take a few minutes.

    • Once the update is done, your Orbi system will automatically reboot with the new firmware.

Using Orbi RBK50V as an Access Point


    • Use an Ethernet cable or Wi-Fi to connect your PC or mobile device to the Orbi network.

    • Open a web browser on your connected device.

    • Enter the Orbi router’s default IP address (usually in the address bar and press Enter.

    • Log in with your Orbi admin credentials.

    • In the Orbi admin panel, navigate to the “Advanced” tab.

    • Select “Advanced Setup” and then choose “Router/AP Mode.”

    • Choose “Access Point” as the operation mode.

    • Save your settings.

    • Disconnect the Orbi from your computer and connect it to the main router using an Ethernet cable.

    • Power cycle the Orbi (turn it off and on) to apply the changes.


Setting up your Orbi RBK50V using either the WPS method or web-based configuration empowers you with a robust and reliable home network. Understanding the setup process, accessing the dashboard, performing resets or firmware updates, and utilising advanced functionalities like access point mode ensures a seamless networking experience tailored to your preferences and needs.

Leave a Reply

Your email address will not be published. Required fields are marked *