Orbi Router Setup

Prepare to turn your home into a WiFi powerhouse! Get ready for an adventure as we guide you through the setup of your Orbi RAX120V2. Whether you opt for the effortless WPS method or the hands-on web-based approach, this Orbi RAX120V2 Setup guide will smoothly walk you through the process. Buckle up for a seamless journey to unlock the full potential of your Orbi RAX120V2.

Orbi  RAX120V2 Setup  via WPS Method 

To set up your Orbi RAX120V2 using the WPS method, follow these steps: 

  1. Power on both your Orbi router and satellite. Wait until the LED lights display a steady white glow.
  2. Identify the WPS buttons on both devices, typically marked with the “WPS” symbol.
  3. Press and hold the WPS button on your router for two seconds.
  4. Within two minutes, press and hold the WPS button on your satellite.
  5. Witness the magic unfold: The LED lights will perform a captivating dance as they synchronise. Once they illuminate a steady blue, your connection is officially established!

By Following these steps given above you have successfully setup your  Orbi RAX120V2  by WPS Method 

How to Setting up  RAX120V2 Setup  via Web-based  Method 

To set up your Orbi RAX120V2 using the Web-Based Method, follow these steps: 

  1. Connect your Orbi router to your modem using an Ethernet cable.
  2. Open a web browser on your computer or mobile device.
  3. Enter the IP address “” and press Enter. This grants access to your Orbi’s settings.
  4. Log in using the default username “admin” and password “password” (unless you’ve made changes).
  5. Follow the on-screen instructions to establish a new WiFi network name and password, configure your internet connection, and adjust any additional settings. 

By following the steps above, you have successfully completed the setup of your Orbi RAX120V2 using the Web-Based Method.

Top Orbi RAX120V2 Troubleshooting Tips You Need to Know

  • Check Hardware Connections:

Ensure that all hardware components are properly connected. Verify that the Orbi router is connected to the modem using the provided Ethernet cable. Also, make sure the Orbi satellite is appropriately placed within range. 

  • Power Cycle:

Power cycle the modem, router, and satellite. Turn off each device, wait for 10 seconds, and then power them back on in the sequence: modem first, router second, and satellite last. Allow sufficient time for each device to fully boot before proceeding. 

  • Firmware Updates:

Ensure that the Orbi router and satellite have the latest firmware installed. Visit the official Netgear website and download the latest firmware updates. Follow the manufacturer’s instructions to update the firmware. 

  • Factory Reset:

Perform a factory reset on the Orbi devices if you continue to face issues. Use a paperclip or similar object to press and hold the reset button on the back of the router and satellite for about 10 seconds. Reconfigure the Orbi system from scratch after the reset. 

  • Placement of Devices:

Check the physical placement of the Orbi router and satellite. Ensure they are not obstructed by walls, electronic devices, or other obstacles that may interfere with the Wi-Fi signal. Optimal placement helps in achieving better coverage. 

Also Read:- Netgear RBK23 AC2200 Orbi Whole Home Mesh

Netgear Orbi Pro Mini AX1800


Q: What’s the difference between a router and a satellite?

A. Your router is the heart of your network, connecting to your internet modem. Satellites act as WiFi extenders, amplifying your network’s reach.  

Q: How many devices can my Orbi RAX120V2 handle?

A: With its powerful WiFi 6 capabilities, it can easily accommodate over 40 devices without breaking a sweat. 

Q: What’s the best placement for my Orbi router and satellite?

A: Ideally, place your router in a central location and your satellite in an area where you need a signal boost. Avoid thick walls and metal objects to ensure optimal connectivity. 

Q: How can I troubleshoot WiFi issues?

A: If you encounter any hiccups, try restarting your devices, repositioning your Orbi units, or checking for firmware updates. If those don’t do the trick, consult Netgear’s support resources for further guidance. 

Leave a Reply

Your email address will not be published. Required fields are marked *